Miracast Not Supported By Wifi Driver Windows 10

Posted on by

If you’re working on a Windows 10 PC and want the apps and content from another screen to show on your PC screen, you’ll want to consider mirroring that device‘s screen or projecting it to your PC. Note that you’ll need a device that supports Miracast. Here’s how to mirror another screen or project to your PC. They're both Windows 10, and all drivers are updated to the newest version. I've ran windos+r - dxdiag and found that Miracast is not supported by wifi driver. The card name on the computer is Intel HD graphics 520, which according to the Intel website supports Miracast. This thread is locked. Miracast Not Working after Windows 10 Update Miracast is a certification standard run by the Wi-Fi Alliance. It can enable certified (Miracast-certified) devices such as laptops, smartphones, and tablets to communicate with TVs, monitors, and projectors without cables.

Would you like to play your favorite game on a larger screen? Or perhaps you have many friends over and there’s a slide show on your mobile device or computer you’d like everyone to get a good view of.

What if I told you there’s a solution on Windows 10 devices (including laptops, smartphones, and tablets) that will enable you to project your device screen to displays like a projector, streaming media player, TV screen, or desktop VDUs without using HDMI cables? You can do this using Miracast.

P.S. If you don’t want to read the full article, you may simply watch a short video showing a quick fix here:


Download free utility: https://bit.ly/3jnprc9
Subscribe

What is Miracast?

Miracast is a wireless technology that makes it possible for users to mirror one device’s display to another device. It could be described as a wireless HDMI cable. It, however, functions exclusively as a screen-mirroring protocol. For instance, let’s say you want to use Miracast to stream a video from your PC to your TV. Your PC screen has to be on the whole time. Miracast doesn’t have the “smart” component.

To use Miracast, you’ll need a Wi-Fi USB dongle or your device has to have built-in Wi-Fi capabilities.

How to resolve the “Your PC or mobile device doesn’t support Miracast” error

Miracast Not Supported By Wifi Driver Windows 10 Media Player

It may happen that when you try to mirror your device, you get an error message that says, “Your PC or mobile device doesn’t support Miracast, so it can’t project wirelessly”.

According to user reports, this error can occur due to a variety of reasons:

  • One of the devices involved does not support Miracast
  • Intel Graphics Hardware is disabled
  • The wireless adapter is forced to 5GHz
  • There’s some third-party software with an integrated VPN feature (such as Cisco AnyConnect) that’s interfering with the Miracast connection.
  • Wi-Fi is turned off when connecting through Intel Graphics Chipset.

If you encounter this error and don’t know how to fix it, don’t fret. We will show you what to do if Miracast couldn’t connect on Windows 10.

Here’s a list of verified fixes that many users have used to get the issue resolved:

  1. Check if your device is Miracast-compatible
  2. See that Wi-Fi is enabled on both devices
  3. Check if Wireless Mode Selection is set to Auto
  4. Enable Intel Integrated Graphics
  5. Reinstall the Wireless Network Adapter driver
  6. Disable third-party VPN solutions

Solution 1: Check if your device is Miracast-compatible

The first thing you have to do before using Miracast is check if your device supports it.

A Miracast connection is powered by two components, namely your graphics card and network adapter. Check if your network adapter and graphics drivers can support the connection.

Follow these steps to do so:

  1. To test the graphics drivers, open the Run dialog by pressing the Windows logo key + R on your keyboard.
  2. Type dxdiag in the text box and click OK or press enter on your keyboard.
  3. On the DirectX window, click on the button that says “Save all information”.
  4. Select a folder to save the text file. Click OK.
  5. Press the Windows logo key + Q.
  6. Search for Notepad in Cortana.
  7. In Notepad, click on File > Open.
  8. Open DxDiag.txt
  9. In the DxDiag document, you’ll see your system information. Miracast should say “Available, with HDCP.” If not, the connection won’t work on your device.

Alternatively, on the DirectX Diagnostic Tool window, click on the Display Tab and check your driver model. You’ll find it at the bottom of the Drivers column. If Driver Model does not say WDDM 1.3 or above, it means your system doesn’t support Miracast.

After you’ve seen that your graphics drivers can support Miracast, the next thing to do is check the compatibility of your network adapter. Here’s how:

  1. Type PowerShell in Cortana.
  2. Right-click PowerShell and select Run as administrator.
  3. In the window, copy and paste the command:

Get-netadapter|select Name, ndisversion

  1. Press enter.
  2. The NdisVersion should be above 6.30 for your PC to support Miracast. If it is under, you should try updating your Wireless Network Adapter. To do so, open the Run dialog (Windows key + R) and type devmgmt.msc. Locate your network adapter, right-click on it and select Update driver. You can use Auslogics Driver Updater to ensure that your drivers are always up to date.

You will need a wireless display adapter if your PC does not support Miracast. You should opt for Microsoft’s Wireless Display Adapter. It is a good choice for Windows devices.

Solution 2: See that Wi-Fi is enabled on both devices

If you have confirmed that your devices actually support Miracast but you still get the error message, check if both devices have Wi-Fi enabled.

To check if Wi-Fi is enabled on Windows 10, follow this procedure:

  1. Press the Windows logo key + R to open the Run dialog.
  2. Type ms-settings:network-wifi in the text box. Press enter or click OK.
  3. You’ll be led to the Wi-Fi tab of the Network and Internet Settings menu. Click on the toggle to activate Wi-Fi if it is deactivated.
  4. Also check if Wi-Fi is activated on the other device. How to do so depends on the device in question. On Android and iOS platforms, you can enable Wi-Fi through the Settings app.

Solution 3: Check if Wireless Mode Selection is set to Auto

Some users got the “Your PC or mobile device doesn’t support Miracast, so it can’t project wirelessly” error because their wireless adapter was on 5GHz or 802.11blg instead of Auto. To set it to Auto, follow these steps:

  1. Right-click on the Windows 10 Start button. Select Device Manager.
  2. Go to the Network Adapters drop-down and expand it.
  3. Right-click on your wireless network adapter and select Properties.
  4. Click on the Advanced Tab.
  5. Under the Property list, select Wireless Mode Selection.
  6. Click on the Value drop-down menu and select Auto.
  7. Click the OK button.
  8. Restart your computer.

Solution 4: Enable Intel Integrated Graphics

Go to your BIOS settings and enable Intel integrated graphics. The steps for this depend on your motherboard. Know your device model and search online to find out the required steps.

Solution 5: Reinstall the Wireless Network Adapter driver

This solution has proved effective for many users. Follow these easy steps to reinstall the Wireless Network Adapter driver:

  1. Open the Run dialog by pressing the Windows logo key + R on your keyboard.
  2. Type devmgmt.msc in the text box and click OK to open Device Manager.
  3. Expand Network Adapters.
  4. Right-click on your wireless network adapter and select Uninstall device from the menu.
  5. In the Uninstall Device window, click the Uninstall button.
  6. Restart your computer. Windows will reinstall the driver automatically.

Solution 6: Disable third-party VPN solutions

If you have third-party VPN software on your PC, such as Cisco AnyConnect, Wi-Fi Direct (the basic technology behind Miracast) will be enabled as Split Tunnel security vulnerability. This compels your system to disable the functionality.

To fix it, disable any such third-party software and restart your PC.

We hope you’ve found this content useful…

Do leave a comment in the section below.

In general, you should regularly check if a PC is protected against online threats. We are sure using Auslogics BoostSpeed 11 will help you to forget about malware risks, and to fix any issues related to the cybersecurity extremely promptly.

Install Drivers For Miracast Windows 10

You Windows 10 computer permits you to hold out tons of functions and apparently if you’re one in every one of the persons UN agency uses his computer or laptop computer professionally, then you, sure enough, would have glorious regarding screen mirroring or what we tend to decision Miracast in windows 10.

Apparently, the most effective half regarding Windows 10 is that mirroring your screen is far too straightforward than different platforms and well, if you’re planning to use your laptop computer or Windows computer via another device, perform a presentation or maybe if you intend to use a way higher desktop rather the one that you really have, then you’ll be able to How to enable Miracast on Windows 10

Well, individuals typically confuse miracast with different things that they typically haven’t any information regarding and well, if you too area unit willing to grasp a lot of regarding this, allow us to guide you this post wherever we might be talking regarding a way to change miracast on windows 10.

WHAT IS MIRACAST?

Miracast can be a standard association between 2 computers or laptop computers that you have got that surpass the Wi-Fi Alliance that allows mirroring of content wirelessly from a compatible laptop, smartphone, or the screen of a tablet to a TV or monitor.

It will simply be placed as “HDMI over Wi-Fi” since it permits content to be solid from one device to a unique show whereas not the usage of cables. Wireless streaming has achieved quality and of late most streaming devices escort support for Miracast.

Display

First offered in Windows 8.1, the Miracast in your Windows 10 PCs and laptops permits sharing of 1080P HD videos (H.264 Codec) and 5.1 surround sound, which means it should provide you with a theater-like experience.

most new computers that move from Windows 8.1 or Windows 10 do not have Miracast Supported. At times, Miracast won’t work for 2 reasons: either it’s not supported on your wireless show, or your laptop computer has past drivers. to envision whether or not or not Miracast is supported on your device, follow the procedure below.

Miracast can be a commonplace sharing of screens for wireless connections from devices like laptops, tablets, or smartphones, to external displays like TVs, monitors or projectors, extended by the Wi-Fi property.

It will roughly be delineating as “HDMI over Wi-Fi“, replacement the cable from the device to the show. With Miracast, you’ll merely manufacture a wireless affiliation between your Windows ten computer and any external show devices.

How to check if your Windows laptop computer supports Miracast

Here are the thanks to quickly check whether or not or not your Windows computer has support for Miracast.

  1. Press the ‘Win + R’ button on your keyboard to open the Run dialog, then type ‘dxdiag’ then press enter.
  2. The DirectX Diagnostic Tool window can open. once the tool finishes grouping all the info relating to your computer, click on ‘Save All Information’ button.
  3. presently you have got have to be compelled to choose where you’d wish to avoid wasting the DxDiag.txt file on your computer. You’ll reserve it on a quick to access location like your desktop.
  4. Open the DxDiag.txt file that’s generally in a pad format. Scroll towards all-time low of the report where you’ll notice the standing of the Miracast on your laptop computer. it’ll either scan ‘Miracast is available’, throughout that case your TV area unit ready to solid its show to a compatible device or scan ‘Miracast not supported’ throughout that case you’d presumably want to explore totally different decisions.

In most of the cases, it shows Miracast doesn’t support as tested with Windows seven that has no support for Miracast.

Download and Update Miracast Drivers:

To check totally whether or not or not your relevant Miracast drivers in your Windows computer (such as graphics drivers and Wi-Fi drivers) area unit outdated or not, you’ll free transfer AN professional driver updater utility tool just like the one given below, remarked as a result of the safest and fastest due to update drivers, which will establish your outdated Miracast drivers in seconds thus manually transfer and install the foremost updated version to unravel the Miracast not operational issue on your Windows 10 pc.

Click the button below to free transfer Driver Talent directly.

Here are solely three straightforward steps to use Driver Talent to assist you to get the foremost compatible Miracast drivers along with your Windows 10 computer simply and quickly.

  1. Click the “Scan” button to scan out your out-of-date Miracast drivers
  2. Click “Repair” or “Update” to transfer and install the right Miracast drivers
  3. Boot your laptop

SETUP THE MIRACAST ON WINDOWS 10:

Create the receiver

The first issue you wish to try and do to create your receiver device ready to explore for the supply. You wish to create certain that the device is in Screen Mirroring mode. You will now be able to search out screen mirroring mode in your PC for Miracast on your TV or monitor by pushing the input button on the remote or show itself.

Project the pc

As shortly as your Miracast device is in Screen Mirroring Mode, you’ll hook up with your show by clicking the notifications button within the terribly bottom mitt corner of your screen. Then the taskbar can slide over from the proper and yet again on rock bottom mitt aspect of your screen, click the connect button. You will need to click the choice given there to see a lot of buttons in your task-bar. Then you may see a listing of all on the market devices near and click on the one you want and you’re connected!

Alternatively, on the pc, navigate to the Charms Bar, it will be accessed by moving your mouse pointer to the highest right of the screen. Once the charms bar is open, click on Devices and so Project choice. (Charms bar will be accessed by pressing Window + C keys together).

Miracast Wireless show Windows 10

On Windows 10, the project choice will directly be accessed by pressing the Window + P keys along.

Add Screen Mirroring Device Windows 10

if your laptop supports Miracast, it is very possible you can see the options as Add wireless devices’.Click on the choice and it’ll begin sorting out the new displays that are on the market within the given vary.

Once you see the required device on the search results, click on the device name. Windows can currently install the desired drivers on the device and inside a couple of seconds, you may see the third half show displaying your device.

Once you’re finished the task and you wish to disconnect the device, you will be able to do it by either disabling the Mirror feature on your projector or TV otherwise you can do constantly from your laptop by planning to the project screen (Windows + P) and clicking on the disconnect choice.

Well, that’s beat this How to enable Miracast on Windows 10 tutorial, options like this are available in terribly handy after you have a requirement and this can be another such feature that is incredibly helpful now and then.