Opcom Remote Key Programming

Posted on by

How to use opcom diagnostic Back to choose “Programming” then “Regeneration Particulate Filter” then “Start Activation” and that's all In this way you can use OPCOM to active How to program key for Opel with OPCOM and Carprog - obd365. I've had trouble with my remote Vauxhall key in the past, this is what you do. Take the key apart as if you are going to fit a new battery, fold up a piece of paper so that it fits on top of the battery and then re assemble the key. By doing this you stop the battery loosing contact with the electronic bits inside the key. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name.

These things you will need:

A Bosch Remote Key
An OPCOM scanner
A laptop

Remotes you can get from ebay or your local Scrap yard. Transponder Chips are identified on the chip itself, and assuming it is not a programmable one (cloned by a key cutter). OP COM you can get from Chinese sellers. Mine is from obd2diy.fr with free shipment.

Start programming:

Fire up you computer with OP COM and launch OP COM
Plug in the OP COM and Turn on the Ignition.

From the Main menu select diagnostics (assuming you have used OP COM and configured the settings before)
Automatic does often work, but it's usually slower than just picking the year and Model.

Immobilizer

Select Body Module, then Immobilizer.
Go to Measuring Blocks and you can see what transponder is in use and how many are programmed (You may have 2 keys but only 1 transponder ID, if you've had one Cloned at a Key cutter)
For Immobilizer programming you need to enter the Security Code from your car pass.
You can then go to Special Functions and Erase Transponder Keys. NB: This will erase all keys and may not be necessary if you have all the keys that are programmed.
Once you've erased all Transponders you can turn the ignition off and on again. The EM light will be flashing to show no valid immobilizer signal received.

Key

Now go to Programming. Not sure the difference between Program Transponder Keys new and old, but if new doesn't work tries old.
Now you've programmed a couple of immobilizers, you can view them on the Measuring Blocks option.

Turn the ignition off and on again to check the EM light is not flashing.

Opcom Remote Key Programming Keyless

Central Locking

If your car has an Alarm then go to Anti Theft Warning, if you don't then go to Central Locking (The programming procedure is the same, but you have additional options with the alarm)
Go to Measuring Blocks, you can see what remote was used last, and the previous one.
Go to Programming, and if necessary Erase Remote Keys (This will erase all remote keys)
Go to Program Remote Key, then click the buttons on the remote you want to add (usually works first click)

Programming

If it doesn't work, make sure you have the right type of remote as mentioned at the top of this page.
Program another key if you like, and then you can view them in Measuring Blocks.

Opcom Remote Key Programming Software

Opcom Remote Key Programming

Opcom Remote Key Programming Keypad

You do not need the security code for Programming the Remotes.

Opcom Remote Key Programming Remote

Hope this information is useful.